Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Volkswagen Bora - Golf - Jetta

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

See other generations:
Video tutorial

This guide illustrates how to dismantle and replace the front door panel of the Volkswagen Bora, as well as the Golf and Jetta. First, open the front door and start by removing the plastic cover of the grab handle, prying it off from the sides; then unscrew the screws found at the back and sides of the door panel, as shown in the video.

At this point, gently detach the panel until it is completely removed; finally, disconnect the opening handle cable to complete the disassembly of the door panel!


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Removing the Window Regulator Motor on Volkswagen Bora - Jetta MK4
Removing the Window Regulator Motor on Volkswagen Bora - Jetta MK4
Volkswagen Bora (2005-2010 / MK 7) .. window regulator motor on a Volkswagen Bora and Jetta MK4. First, open the front door and remove the door panel by unscrewing all the fixing screws;.. …
How to Adjust the Headlights of the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) .. headlights of the Volkswagen Bora, as well as the Jetta and Golf. First, open the bonnet of the vehicle and locate the adjustment screw for the front.. …
How to Remove the Front Headlights on a Volkswagen Bora - Jetta
How to Remove the Front Headlights on a Volkswagen Bora - Jetta
Volkswagen Bora (1998-2005 / MK 6) .. bumper on a Volkswagen Bora, as well as on the Jetta of the same series. First, remove the air intakes located at the bottom of the bumper by pulling.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos