Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Bora
  6. : Door panel

Volkswagen Bora - Door panel

Volkswagen Bora (1998-2005 / MK 6)
How to remove the door panel of the Volkswagen Bora - Golf - Jetta

Today's guide will show us how to remove and replace the front door panel of the Volkswagen Bora, but also of the Golf and Jetta. First we open the front door …read all…
Posted on 11 September 2022 by ScegliAuto
Volkswagen Bora (2005-2010 / MK 7)
How to remove the door panel of a VW Bora

Let's see in this video how to remove the door panel of a Volkswagen Bora. To begin with, we unscrew the screws around the perimeter of the door with a …read all…
Posted on 3 October 2023 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Door panel removal instructions

Almost all German-made cars have an additional panel underneath the door trim panel, generally made of aluminum, which has a sound-absorbing function and which …read all…
Posted on 2 August 2023 by ScegliAuto

Alternator (1) Shock absorbers (2) Antenna (2) Air conditioning (1) Coil (1) Air Vents (1) Arm (1) Grille (1) Glow plugs (1) Bodywork (2) Control unit (1) Timing belt (2) -board computer (1) Checks and maintenance (2) Bearing (1) Headlight (6) Air filter (1) Cabin air filter (2) Petrol filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Handle (1) Engine (1) Window motor (1) Door panel (3) Front bumper (1) Brake pads (3) Pump (2) Door (1) Push button (1) Window lift button (1) Instrument cluster (1) Radiator (1) Fuse box (2) Drive shaft (1) Coolant temperature sensor (1) Outside rearview mirror (2) Windscreen wipers (3) Thermostat (5) Central tunnel (1) Valve (2) EGR valve (2) Interior blower (1) Side window (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos