Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Checks and maintenance

Volkswagen Bora - Checks and maintenance

Volkswagen Bora (1998-2005 / MK 6)
How to adjust the headlights of the Volkswagen Bora
In this short guide, we will see the steps that will allow us to adjust the height of the front headlights of the Volkswagen Bora, as well as the Jetta and the …read all…
Posted on 7 April 2024 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Additives, controls and maintenance
The constant maintenance of the car ensures a long life for it. The addition of a special additive in the diesel improves performance, starting at low …read all…
Posted on 10 July 2023 by ScegliAuto
Alternator (1) Shock absorbers (2) Antenna (2) Air conditioning (1) Coil (1) Air Vents (1) Arm (1) Grille (1) Glow plugs (1) Bodywork (2) Control unit (1) Timing belt (2) -board computer (1) Checks and maintenance (2) Bearing (1) Headlight (6) Air filter (1) Cabin air filter (2) Petrol filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Handle (1) Engine (1) Window motor (1) Door panel (3) Front bumper (1) Brake pads (3) Pump (2) Door (1) Push button (1) Window lift button (1) Instrument cluster (1) Radiator (1) Fuse box (2) Drive shaft (1) Coolant temperature sensor (1) Outside rearview mirror (2) Windscreen wipers (3) Thermostat (5) Central tunnel (1) Valve (2) EGR valve (2) Interior blower (1) Side window (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos