Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Volkswagen Bora located?

Model: Volkswagen Bora MK 7 - Years 2005-2010
Part: Checks and maintenance

To quickly locate the OBD port inside the cockpit of your Volkswagen Bora, you need to follow the steps described in the following guide. First, enter the car and make sure it is turned off, then shift your attention to the air conditioning knobs. At this point, remove the small plastic cover located below the knobs and locate the OBD port you were looking for. Finally, you can connect a diagnostic tool to it to analyze any errors detected by the vehicle's ECU.

Posted on 20 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Boxes in the Volkswagen Bora
Where to Find the Fuse Boxes in the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) Locate the fuse boxes in the Volkswagen Bora (the same applies for the Jetta). In the cabin, the fuse box is situated behind the cover on the driver'…
Diagram and positioning of the fuses of the Volkswagen Bora
Diagram and positioning of the fuses of the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) In this short guide, we will see the diagram and positioning of the fuse boxes of the Volkswagen Bora. First, we open the front door of the vehicle, …
Where are the fuses of the Volkswagen Bora located?
Where are the fuses of the Volkswagen Bora located?
Volkswagen Bora (1998-2005 / MK 6) On board the Volkswagen Bora, the fuses are located inside specific boxes that contain them: these are responsible for regulating the operation of th…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos