Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Conditioning Compressor on the Volkswagen Bora - Golf

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air conditioning

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the air conditioning compressor on the Volkswagen Bora, as well as on the fourth series Golf. First, open the bonnet and lift the vehicle; then locate the compressor under the engine and remove the serpentine belt by loosening the tensioner.

At this point, disconnect the electrical connectors of the pump and detach the pipes from the air conditioning compressor; then unscrew all the fixing screws to remove and replace it, following the video tutorial to the end.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Replacing the Indicator Relay on the Volkswagen Bora - Golf MK4
Replacing the Indicator Relay on the Volkswagen Bora - Golf MK4
Volkswagen Bora (1998-2005 / MK 6) .. Bora MK6, as well as on the fourth series Golf. First, get inside the vehicle and take a thin plastic lever to start removing the central buttons.. …
How to Remove the Door Panel of the Volkswagen Bora - Golf - Jetta
How to Remove the Door Panel of the Volkswagen Bora - Golf - Jetta
Volkswagen Bora (1998-2005 / MK 6) .. door panel of the Volkswagen Bora, as well as the Golf and Jetta. First, open the front door and start by removing the plastic cover of the grab handle,.. …
Where is the OBD port of the Volkswagen Bora located?
Where is the OBD port of the Volkswagen Bora located?
Volkswagen Bora (2005-2010 / MK 7) To quickly locate the OBD port inside the cockpit of your Volkswagen Bora, you need to follow the steps described in the following guide. First, ente…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos