Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Water Pump

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Pump

See other generations:
Video tutorial

Changing the water pump on your car can be a bit complicated, but with some effort and good will, you can manage it. This operation requires maximum care to avoid damaging your vehicle. First, locate the water pump, then remove the cover where the belt is located and lock the toothed flywheel to prevent it from moving during subsequent operations.

Finally, remove the tensioner bearing for the belt, and then slide the toothed belt out of its tracks. To extract the water pump, you will need to remove the four screws on it. Before replacing it with a new one, clean the engine block to eliminate any residue of sealant.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Check Water Pump Efficiency
Check Water Pump Efficiency
Volkswagen Bora (1998-2005 / MK 6) A first method to check the efficiency of the water pump is to see if coolant flows from the return pipe connected to the expansion tank: before star…
Replacement of Coolant Temperature Sensor
Replacement of Coolant Temperature Sensor
Volkswagen Bora (1998-2005 / MK 6) Open the bonnet and disconnect the negative terminal of the battery for safety. The sensor is located on the engine block at the height of the water …
How to Replace the Timing Belt on a Volkswagen Bora
How to Replace the Timing Belt on a Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) Let’s see how to replace the timing belt on a Volkswagen Bora (Jetta). Open the engine bonnet and lift it, securing it with the prop rod. Disconnect …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos