Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Brake pads

Volkswagen Bora - Brake pads

Brake Pads Volkswagen Bora (1998-2005 / mk 6)

Volkswagen Bora (1998-2005 / MK 6)
How to Replace the Brake Pads on a Volkswagen Bora
Before you begin, ensure the vehicle is in first gear and the handbrake is engaged. Start by lifting the car with the jack provided by the manufacturer and …Read all…
Posted on 20 June 2026 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Front Brake Disc and Pad Replacement
Generally, it is not necessary to open the brake fluid reservoir cap when replacing the pads. Begin by removing the front wheel, unclip the outer retaining …Read all…
Posted on 21 February 2026 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Rear Brake Pad Replacement
Lift the vehicle with a jack and remove the rear wheel: for safety, it’s advisable to place the wheel under the rear axle as a makeshift stand. Release the …Read all…
Posted on 7 February 2026 by ScegliAuto
Alternator (1) Shocks (2) Antenna (2) Air conditioning (1) Battery (1) Ignition coil (2) Air vents (1) Control arm (1) Grille (1) Glow plugs (1) Control unit (1) Timing belt (2) Checks and maintenance (3) Bearing (1) Headlight (6) Air filter (1) Cabin air filter (2) Fuel filter (2) Diesel fuel filter (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Tail light bulb (2) Interior dome light bulb (1) Antifreeze coolant (2) Handle (1) Engine (1) Power window motor (1) Clock (1) Door trim panel (3) Front bumper (1) Brake pads (3) Pump (2) Car door (1) Push button (1) Power window switch (1) Radiator (1) Fuse box (13) Axle shaft (1) Engine coolant temperature sensor (1) Side mirror (2) Warning light – error code (1) Service warning light (4) Fuel cap (2) Windshield wipers (3) Thermostat (5) Center console tunnel (1) Valve (2) EGR valve (2) Blower motor (1) Side window (1)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos