Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Diesel filter

Volkswagen Bora - Diesel filter

Volkswagen Bora (1998-2005 / MK 6)
Fuel filter replacement
Open the front hood and intercept the fuel filter: it is located in the front left part (looking at the engine compartment from the front), in front of the …read all…
Posted on 11 July 2023 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Replacing the diesel filter cartridge
To replace this filter you will need: a Torx T30 wrench, a 10mm ratchet wrench with extension and the spare cartridge with its gaskets. Replacing the fuel …read all…
Posted on 8 July 2023 by ScegliAuto
Alternator (1) Shock absorbers (2) Antenna (2) Air conditioning (1) Coil (1) Air Vents (1) Arm (1) Grille (1) Glow plugs (1) Bodywork (2) Control unit (1) Timing belt (2) -board computer (1) Checks and maintenance (2) Bearing (1) Headlight (6) Air filter (1) Cabin air filter (2) Petrol filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Handle (1) Engine (1) Window motor (1) Door panel (3) Front bumper (1) Brake pads (3) Pump (2) Door (1) Push button (1) Window lift button (1) Instrument cluster (1) Radiator (1) Fuse box (2) Drive shaft (1) Coolant temperature sensor (1) Outside rearview mirror (2) Windscreen wipers (3) Thermostat (5) Central tunnel (1) Valve (2) EGR valve (2) Interior blower (1) Side window (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos