Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Fuse box

Volkswagen Bora - Fuse box

Volkswagen Bora (1998-2005 / MK 6)
Fuse localization on the Volkswagen Golf IV/Bora
In this video, we see the arrangement of the fuse boxes on the Volkswagen Golf IV/Bora. The first box is located in the passenger compartment, within the …read all…
Posted on 6 October 2023 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Where to find the fuse boxes in the Volkswagen Bora
Let's see where the fuse boxes of the Volkswagen Bora are located (but they are the same for the Jetta as well). In the cabin, the fuse box is located behind …read all…
Posted on 12 September 2023 by ScegliAuto
Alternator (1) Shock absorbers (2) Antenna (2) Air conditioning (1) Coil (1) Air Vents (1) Arm (1) Grille (1) Glow plugs (1) Bodywork (2) Control unit (1) Timing belt (2) -board computer (1) Checks and maintenance (2) Bearing (1) Headlight (6) Air filter (1) Cabin air filter (2) Petrol filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Handle (1) Engine (1) Window motor (1) Door panel (3) Front bumper (1) Brake pads (3) Pump (2) Door (1) Push button (1) Window lift button (1) Instrument cluster (1) Radiator (1) Fuse box (2) Drive shaft (1) Coolant temperature sensor (1) Outside rearview mirror (2) Windscreen wipers (3) Thermostat (5) Central tunnel (1) Valve (2) EGR valve (2) Interior blower (1) Side window (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos