|
Do it yourself
| |||
| ||||
Diagram and Position of the External Fuses on a Volkswagen Bora
Model: Volkswagen Bora
MK 7
- Years:
2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Today, you will see information regarding the diagram and positioning of the external fuse box or engine bay of the Volkswagen Bora. First, open the engine bonnet and start by removing the plastic cover found at the top right, next to the battery; inside you will find your fuses, as shown in the video. At this point, refer to the vehicle's user and maintenance manual for the diagram and fuse layout, where tables containing the codes and amperages are present; ensure to respect the current values in case of replacements.
Posted on 16 August 2026 by ScegliAuto
Related tutorials
Volkswagen Bora
(2005-2010 /
MK 7)
Below, we will discover the information regarding the positioning and layout of the external fuse box for the Volkswagen Bora. First, open the bonnet…
Volkswagen Bora
(1998-2005 /
MK 6)
In this short guide, we will see the diagram and positioning of the fuse boxes of the Volkswagen Bora. First, we open the front door of the vehicle, …
Volkswagen Bora
(1998-2005 /
MK 6)
In this video, we see the layout of the fuse boxes on the Volkswagen Golf IV/Bora. The first box is located in the cabin, within the dashboard thickn…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.133
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |