Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Thermostat

Volkswagen Bora - Thermostat

Thermostat Volkswagen Bora (1998-2005 / mk 6)

Volkswagen Bora (1998-2005 / MK 6)
How to Replace the Thermostat on a Volkswagen Bora?
To replace the thermostat on a Volkswagen Bora, open the bonnet to access the components located within the engine bay: first, detach the plastic cover from …Read all…
Posted on 12 August 2026 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Replacing Thermostat on Volkswagen Bora - Passat 1.9 TDI
In this video tutorial, you will learn how to remove and replace the thermostat on a second generation Volkswagen Bora, as well as on the Passat, equipped with …Read all…
Posted on 15 June 2026 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Thermostat Replacement
If you need to replace the thermostat, it is advisable to perform this maintenance when the engine is cold to avoid unpleasant burns; in the case of the …Read all…
Posted on 23 February 2026 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
How to Remove and Replace the Thermostat
To access and remove the thermostat, you must first remove a series of components, the most important of which is the alternator, as the thermostat is located …Read all…
Posted on 17 February 2026 by ScegliAuto
Volkswagen Bora (1998-2005 / MK 6)
Replacing the Cooling Water Thermostat
Open the bonnet and disconnect the negative terminal of the battery for safety. Unscrew the screws of the engine cover and remove it to access the interior. …Read all…
Posted on 9 February 2026 by ScegliAuto
Alternator (1) Shocks (2) Antenna (2) Air conditioning (1) Battery (1) Ignition coil (2) Air vents (1) Control arm (1) Grille (1) Glow plugs (1) Control unit (1) Timing belt (2) Checks and maintenance (3) Bearing (1) Headlight (6) Air filter (1) Cabin air filter (2) Fuel filter (2) Diesel fuel filter (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Tail light bulb (2) Interior dome light bulb (1) Antifreeze coolant (2) Handle (1) Engine (1) Power window motor (1) Clock (1) Door trim panel (3) Front bumper (1) Brake pads (3) Pump (2) Car door (1) Push button (1) Power window switch (1) Radiator (1) Fuse box (13) Axle shaft (1) Engine coolant temperature sensor (1) Side mirror (2) Warning light – error code (1) Service warning light (4) Fuel cap (2) Windshield wipers (3) Thermostat (5) Center console tunnel (1) Valve (2) EGR valve (2) Blower motor (1) Side window (1)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos