Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cooling Water Thermostat

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Thermostat

Open the bonnet and disconnect the negative terminal of the battery for safety. Unscrew the screws of the engine cover and remove it to access the interior. Open the cap of the radiator expansion tank and place a collection tray for the coolant under the vehicle. Locate the thermostat and disconnect the electrical connector. Remove the various water hoses to access the thermostat and proceed with its removal. The thermostat is located on the aluminium bracket which should be cleaned beforehand. Install the new thermostat and reassemble the various components that were removed earlier. Reconnect the connector and top up the coolant.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Bora (1998-2005 / MK 6) If you want to replace the rear light bulbs (stop lights) of your Volkswagen Bora, here’s a very simple tutorial that will show you how to do it. Fir…
Volkswagen Bora (1998-2005 / MK 6) To replace the thermostat on a Volkswagen Bora, open the bonnet to access the components located within the engine bay: first, detach the plastic cov…
Volkswagen Bora (1998-2005 / MK 6) For this filter replacement, you will need: a T30 Torx spanner, a 10mm ratchet spanner with an extension, and the replacement cartridge with the rele…

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos