Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Volkswagen Bora?

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Thermostat

To replace the thermostat on a Volkswagen Bora, open the bonnet to access the components located within the engine bay: first, detach the plastic cover from the top of the engine block to access the underlying components. This will allow you to locate the coolant pipe connected to the front of the engine block: by disconnecting this pipe, you can find the underlying thermostat, which can be extracted from its housing and replaced with a new one. After replacement, refit all previously removed components.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Thermostat on Volkswagen Bora - Passat 1.9 TDI
Replacing Thermostat on Volkswagen Bora - Passat 1.9 TDI
Volkswagen Bora (1998-2005 / MK 6) In this video tutorial, you will learn how to remove and replace the thermostat on a second generation Volkswagen Bora, as well as on the Passat, equ…
How to Remove and Replace the Thermostat
How to Remove and Replace the Thermostat
Volkswagen Bora (1998-2005 / MK 6) To access and remove the thermostat, you must first remove a series of components, the most important of which is the alternator, as the thermostat i…
How to Remove the Air Conditioning Compressor on the Volkswagen Bora - Golf
How to Remove the Air Conditioning Compressor on the Volkswagen Bora - Golf
Volkswagen Bora (1998-2005 / MK 6) In this video tutorial, you will learn how to remove and replace the air conditioning compressor on the Volkswagen Bora, as well as on the fourth ser…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos