Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Alternator from a Volkswagen Bora

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Alternator

See other generations:
Video tutorial

In today's video, we will see how to replace the alternator on a first series Volkswagen Bora. This tutorial also applies to other models from the German manufacturer and the Volkswagen group. First, ensure the engine is cold.

Secondly, disconnect the service battery. Proceed with the work.

Locate the alternator and disconnect the connector. Extract the component and carry out the necessary intervention on the vehicle.

Refit the new component and reconnect all connectors. Test the operation and complete the work.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Conditioning Compressor on the Volkswagen Bora - Golf
How to Remove the Air Conditioning Compressor on the Volkswagen Bora - Golf
Volkswagen Bora (1998-2005 / MK 6) In this video tutorial, you will learn how to remove and replace the air conditioning compressor on the Volkswagen Bora, as well as on the fourth ser…
Replacing Thermostat on Volkswagen Bora - Passat 1.9 TDI
Replacing Thermostat on Volkswagen Bora - Passat 1.9 TDI
Volkswagen Bora (1998-2005 / MK 6) In this video tutorial, you will learn how to remove and replace the thermostat on a second generation Volkswagen Bora, as well as on the Passat, equ…
How to Remove and Replace the Thermostat
How to Remove and Replace the Thermostat
Volkswagen Bora (1998-2005 / MK 6) To access and remove the thermostat, you must first remove a series of components, the most important of which is the alternator, as the thermostat i…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos