Do it yourself
| ||||
|
Volkswagen Bora - Video tutorial
Model: Volkswagen Bora
MK 6
- Years 1998-2005 In this video tutorial we will see how to remove and replace the thermostat of a Volkswagen Bora second series, but also on the Passat, powered by 1.9 TDI. First of all we lift the car and go to remove the coolant tube, going to remove the clamp; then we open the bonnet and remove the engine guard. At this point we disconnect the upper tube connected to our thermostat and unscrew with a wrench the fixing screws of the plastic sleeve, where the thermostat is housed inside; once removed, replace it with the new one and reassemble everything!
Posted on 19 March 2024 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |