Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radiator Dismantling Instructions

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Radiator

See other generations:
This video is currently unavailable

To facilitate the radiator dismantling operations, it is recommended to lift the vehicle on a hydraulic lift as it will be necessary to remove the entire front of the bodywork. Once the vehicle is lifted, remove the front wheels and the plastic wheel arch liners.

Proceed to dismantle the front bumper by first releasing the lower grilles (under which there are fastening pins) and then the clips along the grille to remove the trim; also detach the bonnet release tab. After unscrewing the bumper fastening screws, detach it from the sides and remove it. Continue with the dismantling of the grille and the front crossmember (apply two longer pins in place of the short fastening ones to allow the crossmember to shift before removing it) and disconnect the hoses and connections attached to the radiator, also removing the fan assembly.

Finally, unscrew the fastening screws of the air conditioning condenser and the headlights to complete the radiator dismantling.

Before reassembling, test the operation of the water pump, fans, and thermostat.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Checking the Cooling System
Checking the Cooling System
Volkswagen Bora (1998-2005 / MK 6) If the radiator cooling fan does not activate and the engine temperature rises, there may also be a problem with the thermostat, which opens the cool…
Cooling Circuit Repair and Antifreeze Replacement
Cooling Circuit Repair and Antifreeze Replacement
Volkswagen Bora (1998-2005 / MK 6) Lift the vehicle and secure it. Before proceeding, open the radiator cap. Remove the plastic cap located under the radiator using the appropriate too…
Dismantling the Wiper Motor
Dismantling the Wiper Motor
Volkswagen Bora (1998-2005 / MK 6) Open the front bonnet and unscrew the fastening nuts of the wiper blades to remove them; then dismantle the plastic cover located just below the wind…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos