Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Brake Disc and Pad Replacement

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Brake pads

Generally, it is not necessary to open the brake fluid reservoir cap when replacing the pads. Begin by removing the front wheel, unclip the outer retaining spring, and unscrew the caliper mounting bolts. Disconnect the wear sensor and remove the caliper from its seat to extract the old pads. Remove the brake caliper support to take off the disc after unscrewing the hub mounting bolt (it is advisable to use a impact screwdriver). Clean the hub seat, apply grease, and install the new disc, then the caliper support. Retract the piston using a mole grip, insert the new pads, secure the caliper to the support, and apply the retaining spring, reconnecting the wear sensor.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Brake Pad Replacement
Rear Brake Pad Replacement
Volkswagen Bora (1998-2005 / MK 6) Lift the vehicle with a jack and remove the rear wheel: for safety, it’s advisable to place the wheel under the rear axle as a makeshift stand. Relea…
Replacing the Fuel Filter
Volkswagen Bora (1998-2005 / MK 6) Open the front bonnet and locate the fuel filter: it is situated at the front left (when facing the engine bay), in front of the coolant reservoir. U…
How to Replace the Brake Pads on a Volkswagen Bora
How to Replace the Brake Pads on a Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) Before you begin, ensure the vehicle is in first gear and the handbrake is engaged. Start by lifting the car with the jack provided by the manufactur…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos