Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heater Controls and Surround on the Volkswagen Passat B7

Model: Volkswagen Passat B7 - Years 2010-2014
Part: A/C controls

Today, you will see how to remove the climate control buttons and their surround on the Volkswagen Passat B7 in simple steps. First, get in the vehicle and start removing the surround by gently unclipping it from the sides; then disconnect the electrical connector at the back. Next, use a Torx screwdriver to unscrew the screws of the climate control buttons; disconnect the electrical cables at the back to remove all the controls, as shown in the video. For reassembly of the panel, simply apply the reverse procedure!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Sun Visor on the Volkswagen Passat?
How to Replace the Sun Visor on the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To replace the sun visor on the Volkswagen Passat, use a lever tool such as a screwdriver: this will allow you to detach the plastic cover of the cli…
How to Remove the Dashboard Under the Radio on a Volkswagen Passat
How to Remove the Dashboard Under the Radio on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) How to remove the lower dashboard on a Volkswagen Passat? Let's see how to proceed. Remove the trim around the stereo using a plastic lever (where th…
Replacing the Front Indicator Bulb on the Volkswagen Passat
Replacing the Front Indicator Bulb on the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Follow these instructions to remove and replace the front indicator bulb on the Volkswagen Passat. First, move to the front of the vehicle and start …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos