Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Indicator on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

Video tutorial

To reset the service indicator on a Volkswagen Up, first switch off the ignition. Once the ignition is off, press and hold the od/set button for 10 seconds, then turn the ignition back on. When the ignition is on, release the od/set button and wait for 20 seconds.

After that, press and hold the od/set button for a few seconds to perform the service reset. Now start the engine to ensure the reset has been successful.

The procedure is very simple and will take approximately 2 minutes to complete.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Volkswagen Up (2011-2024 / MK 1) In this video tutorial, follow the main steps to remove and replace the timing belt on the Volkswagen Up! 1.0 MPI. First, open the bonnet of your car…
Volkswagen Up (2011-2024 / MK 1) In this video tutorial, see how to reset the service light, an operation to perform after completing the service, on a Volkswagen Up. First, before s…
Volkswagen Up (2011-2024 / MK 1) Today's steps will allow us to reset the service inspection warning of the Volkswagen Up. First, we get into the car and start pressing and holding d…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos