Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Service warning light

In this video tutorial, see how to reset the service light, an operation to perform after completing the service, on a Volkswagen Up. First, before starting the vehicle, press and hold the "0.0/SET" button located on the speedometer. Then, insert the key and turn it to the first position to switch on the instrument panel. This will automatically display a request for the service reset on the information display, so confirm by pressing the "OK" button on the right side of the steering wheel. Finally, restart the vehicle to check that the reset has been done correctly.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Inspection Light on a Volkswagen Up
Resetting the Inspection Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Below are the steps to reset the inspection (service) light on the display of the Volkswagen Up dashboard. First, get in the vehicle and press and ho…
How to Reset the Service Light on a Volkswagen UP
How to Reset the Service Light on a Volkswagen UP
Volkswagen Up (2011-2024 / MK 1) In this video, observe how to perform the procedure to reset the service light on a Volkswagen UP. Get in the vehicle, insert the key but do not star…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the Service light on a Volkswagen Up, press and hold the button on the right side of the instrument cluster, labelled "0.0/SET". While holdi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos