Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Volkswagen Beetle?

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Front bumper

To remove the front bumper of a Volkswagen Beetle, open the bonnet to access the screws that secure the bumper from the inside: these screws hold the brackets to which the bumper is attached. The bumper can be slid off once the screws are loosened, then remove the old bumper from the brackets. Attach the new ones to these brackets so they can be inserted into their housings; it is then necessary to secure everything with bolts, ensuring that the bumper is properly fixed.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Ignition Switch on a Volkswagen Beetle
How to Replace the Ignition Switch on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Before starting, sit in the driver's seat of your Volkswagen Beetle. Begin by unclipping the horn and disconnecting its electrical connector. Next, r…
How to Remove the Window Switch from a Volkswagen Beetle
How to Remove the Window Switch from a Volkswagen Beetle
Volkswagen Maggiolino (1998-2005 / ) Before starting, open the front door of your Volkswagen Beetle. Begin by removing the door panel, disengaging the relevant clips and unscrewing the f…
Instructions for Removing the Alternator on a Volkswagen Beetle
Instructions for Removing the Alternator on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In today's video, we will cover the main instructions on how to remove the alternator on the Volkswagen Beetle. First, open the rear engine cover and…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos