Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Volkswagen Beetle

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Headlight bulb

In this video tutorial, you will learn how to remove the front headlight and optionally replace the bulb of a Volkswagen Beetle (old-style). First, remove the screw from the chrome trim of the headlight by unscrewing it: then remove the front headlight and disconnect the electrical connectors of the headlights to fully detach it. At this point, remove the bulb by pulling it out from inside the headlight, as shown in the video. Replace it with the new one, with the same fitting (in this case, an H4), and reinsert it into the headlight, reconnecting its electrical connector!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Regulator Mechanism on the Volkswagen Beetle
How to Replace the Window Regulator Mechanism on the Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this brief guide, you will learn the main instructions on how to dismantle and replace the window regulator mechanism on the Volkswagen Beetle. Fi…
Installing the Rear Bumper on a Volkswagen Beetle
Installing the Rear Bumper on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this video, you will learn how to install the rear bumper on a Volkswagen Beetle, commonly known as the Bug. First, ensure you have all components…
How to disassemble the front headlight of a Volkswagen Beetle?
How to disassemble the front headlight of a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To remove the front headlight of a Volkswagen Beetle, you must follow some steps. Start by removing the headlight frame by unscrewing the fixing scre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos