|
Do it yourself
| |||
| ||||
Removing the Seatbelt
Model: Volkswagen Golf
MK 4, Golf 4, Golf IV
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003
Video tutorial
Before starting the removal of the seatbelt, it is advisable to remove the front seat to gain easier access to the lower mounting bolt of the seatbelt. Once the seat is removed, proceed to take off the plastic trim from the pillar using a plastic lever, being careful not to break the pressure clips. After removing the lower cover, unscrew the screws securing the scuff plate and detach it: at this point, you can access the lower mounting bolt and disconnect the pretensioner connector; also remove the belt buckle and the upper mounting bolt.
Updated on 13 February 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2008-2012 /
MK 6, Golf 6, Golf VI, 5K1)
Today's guide shows how to remove and replace the seatbelt on a Volkswagen Golf, following the instructions below. First, remove the side pillar to a…
Volkswagen Golf
(2008-2012 /
MK 6, Golf 6, Golf VI, 5K1)
Today's guide will show you the procedure for removing and replacing the seat belt from the Volkswagen Golf in simple steps. First, open the front an…
Volkswagen Golf
(2012-2019 /
Golf 7, Golf VII, MK 7)
The instructions in this guide will show you how to remove and replace the driver's side seatbelt of the Volkswagen Golf. First, open the front door …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |