Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seatbelt of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the driver's side seatbelt of the Volkswagen Golf. First, open the front door and start by removing the plastic cover of the side pillar, prying it off from the sides; then unscrew the bolt located at the bottom of the seatbelt using a Torx spanner, as shown in the video.

At this point, remove the seatbelt pretensioner by unscrewing the bolt and disconnecting the electrical connector; if necessary, also remove the seatbelt attachment, replacing the components with new original ones.


Posted on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Seatbelt on a Volkswagen Golf
How to Replace the Seatbelt on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's guide shows how to remove and replace the seatbelt on a Volkswagen Golf, following the instructions below. First, remove the side pillar to a…
How to Remove the Seat Belt from the Volkswagen Golf
How to Remove the Seat Belt from the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's guide will show you the procedure for removing and replacing the seat belt from the Volkswagen Golf in simple steps. First, open the front an…
How to Replace the Front Seatbelts on a Volkswagen Golf
How to Replace the Front Seatbelts on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Here are the main steps to remove and replace the front seatbelts on a Volkswagen Golf. First, open the front door and begin by removing the plastic …

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos