Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Radio on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

If the radio on your Volkswagen Tiguan is frozen, keeps restarting, and does not respond to commands, you may need to reset the device: first, disconnect the battery cables. Then, remove the panel surrounding the display and loosen the screws underneath so that the radio can be extracted from its housing by disconnecting the rear connectors.

This will also allow you to perform a firmware update; after these operations are completed, you should find that the device is functioning again.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Remove the radio from the Tiguan
Remove the radio from the Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Do you want to remove the radio from the Tiguan? Let's look at how to take out all the parts to replace the radio. Enter the vehicle and locate the p…
How to Reset the Service Light on the Volkswagen Tiguan
How to Reset the Service Light on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In today's video, you will learn how to reset the expired service light on the Volkswagen Tiguan. This operation is useful after performing a service…
How to Reset the Service Light on a Volkswagen Tiguan?
How to Reset the Service Light on a Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this tutorial, you will see how to reset the service light on a Volkswagen Tiguan, a very simple and quick operation to perform only after complet…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos