Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Front Door on Volkswagen Jetta - Golf

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Car door

In this video tutorial, you will learn the procedure to remove the front door of the Volkswagen Jetta, as well as the Golf. First, open the front door and start by disconnecting the cable protection found between the door hinges. Disconnect the electrical connector inside, as shown in the video. Now use a Torx screwdriver to unscrew the hinge screws, gently removing the front door. You can now reassemble everything by applying the reverse procedure of disassembly!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Volkswagen Jetta.
Disassembly of the front door panel of the Volkswagen Jetta.
Volkswagen Jetta (2005-2010 / MK 5, A5) Below we will discover the steps that will allow us to disassemble and remove the front door panel of the Volkswagen Jetta. First, let's open the car…
Removing the Front Door Panel of a Volkswagen Jetta and Volkswagen Golf
Removing the Front Door Panel of a Volkswagen Jetta and Volkswagen Golf
Volkswagen Jetta (2010-2018 / MK 6, A6) .. door panel of a Volkswagen Jetta or Volkswagen Golf, the procedure is quite simple. You will need a flathead screwdriver to remove the clip support.. …
Removing the Rear Door Panel of a VW Jetta
Removing the Rear Door Panel of a VW Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) Remove the rear door panel on a Volkswagen Jetta. Use a screwdriver to unscrew the screws located in the space of the upper door opening lever and th…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos