Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Battery in a Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, Golf V, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Key

See other generations:
Video tutorial

To replace the battery in the key fob of a Volkswagen Golf 5, you will need a flat-head screwdriver and a new battery. The required battery model is a flat CR 2032, 3V. Take the key fob and press the button at the top end to release the metal key. Next, insert the screwdriver tip halfway into the groove of the fob and lever it to separate the two halves.

Insert the screwdriver tip into the side edge of the bottom part of the fob and lever it to open. Remove the old battery and proceed with the replacement.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2019-2026 / Golf Viii, MK 8, Golf 8) To replace the battery in the key fob of the Volkswagen Golf 8, lower the side switch on the device. This allows you to slide the key out from the bo…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) How do you change the battery in the key fob of a Volkswagen Golf 7? Let's see how to do it. Take the key fob and press the button to release the met…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) The following steps will guide you on how to disassemble and replace the battery in the key fob for the Volkswagen Golf. First, take your key fob and…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos