Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Tiguan
    4. : How to disassemble the glove box in Volkswagen Tiguan?

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan AD, MK 2, BW - Years 2016-2024
Part: Glove box
Operation: How to disassemble the glove box in Volkswagen Tiguan?

In this tutorial we can see how to disassemble the glove box drawer in Volkswagen Tiguan. To do this, we will need a Torx T20 key, a set of screwdrivers, a plastic spatula and two radio removal wrenches. First of all, release the indicated clips and remove the lower cover, then unscrew all the screws just released, disengage the external bulkhead of the dashboard and unscrew the following screws. We then open the drawer, disconnect the end damper, remove the multimedia system module and continue by removing the last screws. At this point we can separate the compartment from the dashboard and proceed with the assembly of any spare part.


Posted on 18 December 2022 by ScegliAuto



Where are the fuses on the Volkswagen Tiguan 2017
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW) The Volkswagen Tiguan fuse box for LHD vehicles, is located to the left of the steering wheel, open the driver's side glove box, push the retaining t
How to replace the cabin air filter of the Volkswagen Tiguan 2
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW) If you own a Volkswagen Tiguan Mk2 and want to replace the cabin air filter by yourself, all you need to do is follow the various steps described in
Replacement of the fusibie on Tiguan
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Do we want to replace the damaged fuses of the Tiguan car? Let's see where to find them inside the vehicle. We open the glove box of the car located

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos