Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace All Bulbs in the Volkswagen Transporter T6 Headlights

Model: Volkswagen Transporter MK 6, T6 - Years 2014-2025
Part: Light bulb

Learn how to replace the bulbs on the Volkswagen Transporter T6: for the front ones, open the bonnet and access the large clip located behind the headlight unit. It is straightforward to remove it to examine and replace the bulbs yourself. For the side indicator lens, simply apply gentle pressure to the lens itself to remove it from its housing and perform the necessary operations. With equal ease, you can put it back in place. For the fog lights, turn the wheel fully inwards and remove the panel that protects access. Here, you can easily access the fog light. To remove it, just turn it. For the rear light clusters: open the tailgate and remove the two screws securing the light cluster. Once done, give it a firm pull and it will come away. Remove the four screws connecting the light cluster to the electrical base, and here you can change any faulty or burnt-out bulbs. To remove them, simply press and turn. To close, reverse the procedure.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (2003-2014 / T5, MK 5) Today's instructions will show us how to disassemble and replace the front headlight of the Volkswagen Transporter, following these simple steps. Fir…
Volkswagen Transporter (2003-2014 / T5, MK 5) The following steps will allow you to adjust the height of the front headlights on the Volkswagen Transporter. First, position yourself in front of a…
Volkswagen Transporter (2014-2025 / MK 6, T6) Today, we will explain how to start the reset procedure for the diesel particulate filter on a Volkswagen Transporter T6 after the warning light has …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos