|
Do it yourself
| |||
| ||||
How to Change the Headlamps on a Volkswagen Transporter
Model: Volkswagen Transporter
T5, MK 5
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
Let's see how to change the front headlamps on a Volkswagen Transporter T5: this task requires patience, as it involves loosening the bumper to access the headlamp's fastening. Start by removing the plastic covers in the engine compartment, unclip the plastic fasteners of the front grille, and remove the three screws securing the plastic wheel arch to access the rear fixings of the vehicle. Unscrew the nuts and screws securing the bumper to the body; it is not necessary to remove it completely, just loosen it to create the needed space. Disconnect the electrical connector, remove the fastening screws, and unclip the headlamp; the new headlamp often does not include the electric adjustment motor (if present), so you will need to remove it from the old headlamp and fit it to the new one. Install the headlamp and reassemble everything in reverse order. After reinstalling the headlamp, it is essential to adjust the headlamp alignment. This task can be tedious due to the number of screws and clips to remove.
Posted on 2 May 2026 by ScegliAuto
Related tutorials
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
To replace the front headlamp bulb on a Volkswagen Transporter, open the bonnet and locate the rear of the headlamp unit. Remove the protective cover…
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
The following steps will allow you to adjust the height of the front headlights on the Volkswagen Transporter. First, position yourself in front of a…
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
The video shows the fuse diagram for a Volkswagen Transporter van. The first fuse panel features a layout where the fuses are assigned to: light cont…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |