Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt in the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Timing belt

In today's video, you will see how to replace the timing belt kit in the diesel Volkswagen Passat. First, remember to work with the engine cold to avoid possible burns. Then, open the front bonnet and remove the sealing components inside the engine compartment. At this point, access the underside of the vehicle by lifting it on a ramp and proceed to remove the auxiliary belt. Once done, you can replace the relevant components and then install the new parts and test them.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Volkswagen Passat?
How to Replace the Timing Belt on a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To replace the timing belt on a Volkswagen Passat, open the bonnet to access the components on the left side of the engine block. Here you will find …
How to Replace the Timing Belt on a Volkswagen Passat?
How to Replace the Timing Belt on a Volkswagen Passat?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Replacing the timing belt on a Volkswagen Passat involves opening the bonnet to access the components located within the engine bay: on the left side…
How to Replace the Timing Belt on the Volkswagen Passat?
How to Replace the Timing Belt on the Volkswagen Passat?
Volkswagen Passat (1988-1996 / B3, B4) To replace the timing belt on the Volkswagen Passat, open the bonnet to access the components inside the engine bay: on the left side, you will find …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos