Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Rear Seats of the Volkswagen Transporter

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

Today, you will see in this brief and simple guide how to dismantle and replace the rear seats of the Volkswagen Transporter. First, open the rear doors and start removing the plastic covers found on the seat rails; then use the lever located under the seat to move it forward, allowing you to unclip and remove it, as shown in the video.

Follow the same procedure if you want to remove the other rear seats, increasing the vehicle's load capacity; simply apply the reverse procedure to reassemble the seats!


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to remove the front seats of the Volkswagen Transporter.
How to remove the front seats of the Volkswagen Transporter.
Volkswagen Transporter (2003-2014 / T5, MK 5) The main steps today will show us how to disassemble and remove the front seats of the Volkswagen Transporter. First, let's open the front doors of t…
How to Remove the Rear Seat of a Volkswagen Transporter T5
How to Remove the Rear Seat of a Volkswagen Transporter T5
Volkswagen Transporter (2003-2014 / T5, MK 5) To remove the rear seats in this vehicle, follow the instructions provided here and refer to the video tutorial. The two rows of seats are secured to…
How to Remove the Rear Seats in a Volkswagen Kombi Van?
How to Remove the Rear Seats in a Volkswagen Kombi Van?
Volkswagen Transporter (1967-1979 / MK 2, T2) This tutorial shows how to remove the rear seats in a Volkswagen Kombi van, a very simple and quick operation. First, open the side door, then tilt t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos