Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Reverse Light Bulb on the Volkswagen Tiguan

Model: Volkswagen Tiguan MK 1, 5N - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on this vehicle as a DIY task, refer to the video and description below. First, lift the boot, locate the light where the bulb has blown, remove the plastic panel on the boot's edge, and underneath it, there are two screws that need to be removed to extract the light unit by pulling it towards you, taking care to disconnect the electrical connector at the back.

Next, open the rear light, unclip the bulb, and replace it with a new one. Then, reassemble the light.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Volkswagen Tiguan (2007-2016 / MK 1, 5N) In this brief and simple guide, you will learn the steps to remove and replace the reverse light bulb on the first series Volkswagen Tiguan. First, u…
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Follow these steps to remove and replace the reverse light bulb and rear bumper on the Volkswagen Tiguan. First, open the boot and start unscrewing t…
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Today’s steps will show you how to remove and replace the reverse light bulb on the Volkswagen Tiguan, following the instructions below. First, move …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to reset the tyre pressure warning light on the Toyota Yaris Hybrid?

To reset the tyre pressure warning light on the Toyota Yaris Hybrid, inflate the tyres until they reach the optimal pressure value: the recommended pressure is indicated on the sticker located on the driver's door pillar. Once inflated, navigate through the menu that appears on the instrument cluster: select the option related to tyre pressure and proceed to select the reset option. After completing the operation, you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos