|
Do it yourself
| |||
| ||||
Guide to Removing the Front Bumper and Grille
Model: Volkswagen Golf
Golf IV, MK 4, Golf 4
- Years 1997-2003
There are numerous maintenance tasks you can perform by removing the front bumper. In just a few minutes, with a screwdriver and a bit of patience, you can complete the operation.
Open the car's bonnet. There are 3 clips at the front, as shown in the video, that need to be released. You can unclip the side clips by hand; for the central one, use the tip of a screwdriver to lift the trim and access the screws underneath that you will need to unscrew. Now move to the lower part of the bumper. On the side, remove the unpainted grille and unscrew the screw underneath, repeating the operation on the opposite side. The next screws are located inside the front wheel arch. Starting from the driver's side, turn the steering wheel towards the passenger side. Now that you have space, proceed to remove the 4 screws, repeating the same process on the other side of the car. The bumper is almost completely free. Unclip it from one side, then the other, and finally, carefully free it from the central part. The job is done.
Updated on 2 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
This guide shows how to replace the grille of a car, which is the front part of a vehicle that starts from the bonnet and descends to the front area,…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
The steps outlined in this guide will allow us to dismantle and replace the front bumper of the Volkswagen Golf. First, we open the hood of the car a…
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
Before you start, open the front bonnet of your Volkswagen Golf. Begin by unscrewing and removing the four upper screws revealed when you opened the …
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.380
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |