Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Light on a Volkswagen Passat?

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Warning light – error code

To reset the engine light on a Volkswagen Passat, there is no single procedure, as this light illuminates to signal a generic fault in the injection system: you can identify the problem by connecting a diagnostic tool to the vehicle's OBD port, located at the bottom left of the steering column. You can then resolve the issue and proceed with resetting the light: this must also be done using the scanner. Once the error is reset from the control unit, you can switch off and on the ignition, ensuring that the light has been reset.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Volkswagen Passat
Resetting the Service Light on the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today's instructions will show you how to reset the maintenance light for the engine oil change on the Volkswagen Passat. First, get in the vehicle a…
How to reset the "Service" light on a Volkswagen Passat?
How to reset the "Service" light on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To reset the "Service" light on a Volkswagen Passat, start the instrument panel without turning on the engine. Use the controls on the steering wheel…
How to Reset the Service Light on the Volkswagen Passat
How to Reset the Service Light on the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Briefly, here are the instructions to reset the service and maintenance light on the Volkswagen Passat. First, get inside the cabin and press and hol…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - What does the flashing glow plug warning light on the Volkswagen Passat indicate? Read answer
    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos