Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the Volkswagen Crafter?

Model: Volkswagen Crafter MK 2, SZ, SY - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

Knowing the location of the OBD port in a vehicle is very important if you want to carry out DIY repairs without having to visit the mechanic every time. This is provided you have a computer and have purchased the appropriate diagnostic software for your vehicle model.

Through the OBD port, you can read the stored error codes in the ECU and proceed confidently with your DIY repairs. In the Volkswagen Crafter, the OBD diagnostic port is located on the driver's side, on the left side.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Where is the OBD Port on the Volkswagen Crafter?
Where is the OBD Port on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) The "OBD port" or "diagnostic socket" on a 2020 Volkswagen Crafter is located inside the cabin. Specifically, the OBD port is found under the lower p…
Where is the OBD port on the 2018 Volkswagen Crafter?
Where is the OBD port on the 2018 Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) To locate the OBD port on your 2018 Volkswagen Crafter, it only takes a few seconds. All you need to do is carefully read the following guide and fol…
How to Reset the Service Light on a Volkswagen Crafter?
How to Reset the Service Light on a Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) To eliminate the Service light that appears on the instrument cluster of the Volkswagen Crafter, insert the ignition key into the ignition switch and…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos