Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port on the 2018 Volkswagen Crafter?

Model: Volkswagen Crafter SZ, SY, MK 2 - Years 2017-2026
Part: Dashboard

To locate the OBD port on your 2018 Volkswagen Crafter, it only takes a few seconds. All you need to do is carefully read the following guide and follow the described steps. First, enter the vehicle from the driver's side, ensuring that it is off and the handbrake is engaged. Once you have taken these simple precautions, move to the lower part of the dashboard and locate the OBD port you are looking for. At this point, you can connect any compatible diagnostic tool to it.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD Port on the Volkswagen Crafter?
Where is the OBD Port on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) The "OBD port" or "diagnostic socket" on a 2020 Volkswagen Crafter is located inside the cabin. Specifically, the OBD port is found under the lower p…
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) If you own a second series Volkswagen Crafter and want to find out where the OBD2 port is located, you just need to carefully follow the following st…
Where is the OBD Port on the Volkswagen Crafter?
Where is the OBD Port on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) Knowing the location of the OBD port in a vehicle is very important if you want to carry out DIY repairs without having to visit the mechanic every t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos