Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Volkswagen Crafter 2 located?

Model: Volkswagen Crafter MK 2, SZ, SY - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

If you own a second series Volkswagen Crafter and want to find out where the OBD2 port is located, you just need to carefully follow the following steps and apply them in the correct order. First of all, reach the driver's seat in the vehicle and then shift your focus to the left side of the dashboard, specifically in the lower area.

Next, locate the OBD2 port of your Volkswagen Crafter Mk2 and the procedure is complete. If necessary, connect a diagnostic tool compatible with the vehicle to it in order to analyze the ECU.


Posted on 1 September 2025 by ScegliAuto


Related tutorials

Where is the OBD Port on the Volkswagen Crafter?
Where is the OBD Port on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) The "OBD port" or "diagnostic socket" on a 2020 Volkswagen Crafter is located inside the cabin. Specifically, the OBD port is found under the lower p…
Where is the OBD Port on the Volkswagen Crafter?
Where is the OBD Port on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) Knowing the location of the OBD port in a vehicle is very important if you want to carry out DIY repairs without having to visit the mechanic every t…
Where is the OBD port on the 2018 Volkswagen Crafter?
Where is the OBD port on the 2018 Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) To locate the OBD port on your 2018 Volkswagen Crafter, it only takes a few seconds. All you need to do is carefully read the following guide and fol…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos