Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tyre pressure warning light on the Volkswagen Transporter?

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Volkswagen Transporter, turn on the ignition by rotating the key in the ignition barrel. Then, press the MENU button located on the right side of the steering wheel and navigate using the controls on the same side.

When you find the tyre pressure option, select it by pressing the OK button and confirm the subsequent confirmation message. After confirmation, you will notice that the warning light has been completely reset.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Volkswagen Transporter (2014-2025 / T6, MK 6) In today's video, we will guide you on how to reset the tyre pressure warning light (TPMS) of the Volkswagen Transporter; before performing the reset…
Volkswagen Transporter (2014-2025 / T6, MK 6) To reset the tyre pressure warning light on the Volkswagen Transporter, inflate the tyres to the correct pressure value: this value is indicated on t…
Volkswagen Transporter (2003-2014 / T5, MK 5) The following steps show you how to reset the tyre pressure monitoring system (TPMS) warning light on the Volkswagen Transporter; before performing t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos