Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on a Volkswagen Passat

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Warning light – error code

The following description provides all the necessary information to perform the reset. Use the key fob to turn on the instrument cluster of the Passat (do not start the engine). Read the oil change warning on the display. Turn off the Passat's instrument cluster. Press and hold the button located above the instrument cluster while it is off (specifically the 0.0 button). Turn on the vehicle's instrument cluster. Release the 0.0 button. Use the button located on the instrument cluster (0.0 button) to confirm the selection. Press the 0.0 button and confirm the reset.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, you will learn how to reset the service light in a Volkswagen Passat, a very simple and quick operation to perform only after compl…
Volkswagen Passat (2010-2014 / B7) In this tutorial, you will see how to reset the service on the Volkswagen Passat, an extremely simple and quick operation to perform only after compl…
Volkswagen Passat (2010-2014 / B7) In this tutorial, see how to reset the service light in a Volkswagen Passat, a very simple and quick operation to perform only after completing all s…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - What does the flashing glow plug warning light on the Volkswagen Passat indicate? Read answer
    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos