Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Trim of the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Trim cover

In today's tutorial video, you will see the steps that will allow you to remove and replace the centre trim of the instrument panel of the Volkswagen Polo, following the instructions provided below. First, get inside the vehicle and use a thin lever to remove the trim from the instrument panel; remove the cup holder and any buttons first, disconnecting the electrical connectors, as shown in the video. At this point, detach and remove the trim and air vents, replacing it with the new one; then reassemble everything by applying the reverse procedure!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Stuck Fuel Flap on the Volkswagen Polo
How to Remove the Stuck Fuel Flap on the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today’s guide will show you how to remove and replace the stuck fuel flap on the Volkswagen Polo. First, open the fuel flap; it can be opened from th…
How to Remove the Handbrake Lever Cover on the Volkswagen Polo
How to Remove the Handbrake Lever Cover on the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this brief and simple guide, you will learn how to remove and replace the plastic cover of the handbrake lever on the Volkswagen Polo. First, get …
How to Replace the Heater Radiator on a Volkswagen Polo?
How to Replace the Heater Radiator on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The heater radiator on a Volkswagen Polo is located inside the dashboard, so you will need to completely dismantle it to access it. To remove the rad…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos