Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio in a Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to remove and then replace the radio in a Volkswagen Golf, a very simple and quick operation. First, ensure that the key is not inserted, then, using a plastic spatula to avoid leaving marks if possible, unclip the outer frame of the radio.

Next, undo the four fixing screws located at the corners, grasp the entire unit, and pull it out of the housing. At this point, simply disconnect the internal connectors, connect the replacement, and follow the reverse procedure.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
How to Enter the Radio Code for the Volkswagen Golf
How to Enter the Radio Code for the Volkswagen Golf
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) Today, let's discover how to retrieve and enter the code for the standard radio of the Volkswagen Golf, as well as the Jetta. First, get inside the v…
How to Enter the Radio Code for a Volkswagen Golf
How to Enter the Radio Code for a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's guide will show you how to find and enter the radio code for your Volkswagen Golf, following the instructions below. First, get into the vehi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos