Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Window Regulators on a Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years 2016-2025
Part: Warning light – error code

To reset the window regulators on a Volkswagen Tiguan, fully raise the corresponding window by pulling up the relevant button. Once the window is at its maximum height, pull the button up again. Wait a few seconds until you hear a click; this indicates that the corresponding window has been correctly reset. After the reset, you can perform the same procedure on all other windows to reset them as well.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Window Switch Panel from a Volkswagen Tiguan
How to Remove the Window Switch Panel from a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To remove the window switch from the Volkswagen Tiguan, use a plastic spatula; this will ensure that you do not damage any part of the vehicle, unlik…
How to Reset the Window Regulator on a Volkswagen Tiguan?
How to Reset the Window Regulator on a Volkswagen Tiguan?
Volkswagen Tiguan (2024-2026 / MK 3) To reset the window regulator on a Volkswagen Tiguan, first, turn on the instrument panel by pressing the appropriate button located on the central d…
How do you replace the window regulator of the Volkswagen Tiguan?
How do you replace the window regulator of the Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) In order to replace the window regulator of the Volkswagen Tiguan, you need to detach the door handle trim, in order to loosen all its underlying scr…

    Frequently Asked Questions

    • Tiguan 2016-2025 - What to do if I have the error in the Volkswagen Tiguan start & stop system? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos