Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

To replace the rear light of a Volkswagen Golf, you need to completely remove the two parts that make up the light assembly, which are positioned on the rear side of the frame and on the outer part of the tailgate. In both cases, to remove these two parts, you will need to detach the plastic cover located inside, corresponding to the light: under this cover, you will find a knob that must be unscrewed in order to extract the light from its housing.

Once the old light has been removed, you can insert the new one, securing it properly.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Removing the Rear Headlamp of a Volkswagen Golf 6
Removing the Rear Headlamp of a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Is the rear headlamp of your Volkswagen Golf 6 due for replacement? Here’s how to remove it. Open the boot lid, remove the side fabric cover, and acc…
Removing the Rear Headlamp of a Volkswagen Golf 4
Removing the Rear Headlamp of a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Is the rear headlamp of your Volkswagen Golf 4 damaged and needs replacing? Here’s how to remove it. Open the boot lid, remove the side fabric cover,…
How to Replace the Rear Light Bulbs on a Volkswagen Golf
How to Replace the Rear Light Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below, you will find instructions on how to remove and replace the rear light and its bulbs on a Volkswagen Golf. First, open the rear hatch and star…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos