|
Do it yourself
| |||
| ||||
How to deactivate the Start&Stop system in Volkswagen vehicles?
Model: Volkswagen Volkswagen Various
Video tutorial
To deactivate the Start&Stop system in Volkswagen vehicles, connect a diagnostic tool to the vehicle's OBD port: this port is located at the lower left part of the dashboard relative to the steering column. Once the scanner is connected, select the model of the car in question and its corresponding version: then, by following all the steps in the tutorial, you can permanently deactivate the Start&Stop system. At the end of the procedure, disconnect the scanner and verify that the operation has been completed correctly.
Updated on 10 August 2026 by ScegliAuto
Related tutorials
Volkswagen Volkswagen Various
The Start & Stop system stops the engine during prolonged stops and quickly restarts it as soon as the onboard sensors detect the driver's intention …
Volkswagen Volkswagen Various
To disable the Safe Lock on Volkswagen vehicles, connect a diagnostic tool to the OBD port located on the lower left side of the dashboard, near the …
Volkswagen Volkswagen Various
To disable the alarm on Volkswagen vehicles, connect a diagnostic tool to the vehicle's OBD port, which is located just below the steering column. On…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Replace the Headlight Bulb on a Mercedes A-Class W169?
If one or more bulbs in the front headlights of your Mercedes A-Class W169 (2004-2012) are not functioning correctly, you need to replace them. This is a very simple task that takes just a few minutes. First, park the car safely and turn it off completely. Next, go to the front and lift the hood. Remove the protective cover located inside the engine compartment and take out the faulty bulb. Finally, insert the new replacement bulb and properly reattach the protective cover. Close the hood, and you're done. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |