Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the pollen filter on the Volkswagen Polo 4n version.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Cabin air filter
Operation: How to replace the pollen filter on the Volkswagen Polo 4n version.

The pollen filter of the Volkswagen Polo 4n is located under the glove compartment, on the passenger side, in a drawer that needs to be pulled forcefully towards oneself, lying on the passenger footwell mat. Once we have pulled down the filter, we need to clean the compartment from which we removed it thoroughly with a blast of compressed air, to remove dust and dirt. We throw away the used filter and put the new and clean one back in place, paying attention to the direction of installation: the arrows should point downwards (in this case, towards the left side of the cabin). We close the drawer and the job is done.


Posted on 15 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - What does the cabin filter light on the Volkswagen Polo 4 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos