Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Key Battery on the Volkswagen Golf 4?

Model: Volkswagen Golf MK 4, Golf 4, Golf IV - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Key

See other generations:
This video is currently unavailable

To replace the battery in the key for the Volkswagen Golf 4, use a screwdriver to lever in the horizontal groove located halfway up the device: this will separate the upper part from the lower part. The lower part must be opened by levering inside, allowing access to the components inside: the battery can be removed from its housing and replaced with a new one. After replacement, close the remote again by reconnecting the two halves and check that it functions correctly.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) To replace the battery in the remote key for the Volkswagen Golf 7, press the button located at the top of the device to lift the key blade: once it …
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) Let's see how to quickly and easily replace the battery of the Volkswagen Golf key/remote with just a small flathead screwdriver, avoiding the need t…
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) In this guide we will see the information regarding the disassembly and replacement of the battery of the Volkswagen Golf key remote, but also of the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos