Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Power Steering Fluid in a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Steering wheel

See other generations:
Video tutorial

The video tutorial presented here explains in detail not only how to top up the power steering fluid but also how to replace it if desired. After opening the bonnet, locate the cap of the fluid reservoir, which is adjacent to the vehicle's battery.

Once the cap is removed, use a funnel to top up the fluid. If you decide to replace the fluid instead, use a manual fluid extraction pump, or lift the vehicle with a jack and disconnect the hose beneath the reservoir to drain all its contents, then proceed to fill it completely with new fluid.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Power Steering on a Volkswagen Polo
How to Replace the Power Steering on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Here are the main steps to dismantle and replace the power steering on a Volkswagen Polo. First, raise the vehicle and begin by removing the front ri…
Where is the Power Steering Fluid Reservoir on a Volkswagen Polo?
Where is the Power Steering Fluid Reservoir on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video, see where the power steering fluid reservoir is located on a Volkswagen Polo, useful if you need to top it up. As shown, the reservoir…
How to top up the power steering oil in a Volkswagen Polo
How to top up the power steering oil in a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Here are the steps to top up the power steering oil in a Volkswagen Polo. First, open the bonnet of your car and begin to remove the plastic cover si…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos