Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Coolant Level of the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Antifreeze coolant

This guide provides instructions to check the antifreeze level of the engine in the Volkswagen Passat, as well as in other models from the manufacturer. First, open the bonnet of the vehicle and locate the coolant reservoir on the left; then, check that the level is at the maximum mark, as shown in the video. If the antifreeze level is at the minimum or below, top up with new antifreeze of the same type as the existing one.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to check the engine fluids of the Volkswagen Passat 1.8T
How to check the engine fluids of the Volkswagen Passat 1.8T
Volkswagen Passat (1996-2005 / 3BG, B5) Following these brief steps, we will see how to check the levels of all the engine fluids of the Volkswagen Passat 1.8T. First of all, we open the ho…
How to Change the Coolant Temperature Sensor on a Volkswagen Passat 1.8T
How to Change the Coolant Temperature Sensor on a Volkswagen Passat 1.8T
Volkswagen Passat (1996-2005 / 3BG, B5) In this guide, find the instructions to remove and replace the coolant temperature sensor on a Volkswagen Passat 1.8T. First, open the bonnet and loc…
How to Remove the AdBlue Warning Light in a Volkswagen Passat?
How to Remove the AdBlue Warning Light in a Volkswagen Passat?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) If the AdBlue warning light has illuminated on the dashboard of your Volkswagen Passat, it means the anti-pollution fluid has reached a low level and…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos