Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Switch in a Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door lock

To replace the ignition switch in a Volkswagen Golf, you need to completely remove the steering wheel from the end of the steering column. This will allow access to the plastics covering the column, which can be removed by unscrewing the fixing screws. After removing the plastics, locate the ignition switch, which can be taken out of its housing by unscrewing the fixing screws and disconnecting the power cables. Once removed, insert the new replacement part, connecting it and securing it in its place.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Ignition Switch from a Volkswagen Golf Plus?
How to Remove the Ignition Switch from a Volkswagen Golf Plus?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, learn how to remove the ignition switch from the unique Volkswagen Golf Plus. Although the video is quite basic, it serves its purpose well. O…
How to Disable the Passenger Airbag on a Volkswagen Golf
How to Disable the Passenger Airbag on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the passenger airbag on a Volkswagen Golf, open the front passenger door to locate the switch on the side of the dashboard: this switch ne…
How to Remove the Ignition Switch from a Volkswagen Golf Series 4
How to Remove the Ignition Switch from a Volkswagen Golf Series 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) How do you remove the ignition switch from a Volkswagen Golf Series 4? In this video, the procedure is explained: before removing the ignition switch…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos